Showing posts with label needles and gauge. Show all posts
Showing posts with label needles and gauge. Show all posts

June 3, 2014

Oops, I Did It Again

Since I can't really do the shawl anywhere but at home, I've been knitting a sock for my subway project:


'bout time I used the wound-up skein that's been sitting on my coffee table for at least 6 months
It's not a bad pattern, and I love the design and the yarn.  Might have had to rip it out twice due to issues, but none of that was the pattern's fault (first time I screwed up the chart, the second I realized I had to make it a bit smaller to fit...well, ok, one size fits all isn't for socks, so that may be the pattern's fault). This is my first time doing toe up socks, and therefore the style of heel involved is completely new to me:


I'm not a fan of being blind to the pattern, but having got past the heel now, it seems like it'll work out, and at least now I understand how this heel works.  Well, I'm ok mainly because according to the swatch, this yarn will grow a bit so being slightly small for my foot is a good thing.  But I'll take it.

However, that's not what I'm hear to talk about.

I'm here to talk about another needle.  My brand new Knitter's Pride Karbonz circulars, size 0 since I tend to do a lot of socks on 0s.  I bought them a bit less than a month ago when my knit group made their what's turning out to be annual trip to WEBS.  I was being splurge-y, and since I tried out the Karbonz at VOGUEknitting Live, I've wanted to get one.  So I did.

I like them.  As someone who favors metal needles, I still liked them.  They're not as slick as other metals, but still slick enough for my comfort without feeling like I fighting it too much, yet not so slick it feels like you're slightly out of control. They feel solid, but not heavy.  It's an interesting sensation, and I find them very usable.

So when I had to rip out my sock the first time, I switched to my new needles as was happy.  Until today.  Because I broke them:


Oh, they don't seem broken, unlike the last needle I broke (also on a sock, of course).  But they are broke.  You see in that picture up there that the tips aren't the carbon material but are metal?  Sepreate pieces of course. So, I was knitting along on the subway into work today, only to have one of those tips dislodge just enough so that it wiggles back and forth with the slightest of pressure.  Including trying to pull a stitch back with it, because of course it was the side I was holding in my right hand. I managed to complete the row very carefully, then I put them away because I was afraid any more knitting would cause that tip to come off completely and anyway, it's not easy to knit with a tip that bends when put under the slightest of pressure.

Am I really that hard on my needles?  I mean, I'll entertain that thought because I know I'm a tighter, rougher knitter...it's why I prefer metal needles for most yarn.  Or just unlucky and got needle with an issue?

Anyway, there is a happy ending to this story.  I emailed WEBS and asked if they had a broken needle return-and-replace policy, because I couldn't find it on their site and, I mean, it's only been a month.  I was fully prepared to pay the shipping to send it back and have them send me a new one because it's still cheaper that way AND I won't have to deal with the switching needle gauge problem (because I do have a metal size 0 circular for socks here already).  They replied that they have a no-questions asked replacement policy on Knitter's Pride needles, and that they would send me a replacement right away.

Hopefully I don't break this one.  The only suck-y part right now is that I don't have a travel project to work on.  Unless I just finish this first sock with the metal needles.  How much could my gauge change for the upper part of a sock with a crazy design, anyway?

November 23, 2013

The Tale of a Broken Needle, Part 2, Or Why You Shouldn't Switch Needles in the Middle of a Project

The good news is that I finished my Mom's Hanukkah socks with time to spare:


The bad news is that, contrary to every other sock set I've knitted so far, the second one came out a bit bigger than the first:

 
Which sucks because the first was the perfect length.

Now,  I know I did the exact same thing for both of them.  Thing's like these types of cable, lace, motif, whatever patterns make it easy to write 'stop at row x' and to do so, since you're keeping track of rows and can see where you are via the pattern.  No, I'm pretty sure the difference in size is due to the fact that I had to switch needles to knit the second sock.

If you go back to this post, you'll see why that was unavoidable.  However, you'll also note that I mentioned that my gauge shouldn't be that different with another pair of nickel-plated needles.  So, I got all excited and ordered new sock needles for that size:



And just cast-ed on and went, conveniently forgetting that my analysis was based on the fact that the Knitter's Pride Nova needles and the KnitPicks Options are very similar (I wouldn't be surprised if the same manufacture makes them).  What isn't that similar are those Addi's I decided to buy because ooh, needles made for Magic Looping socks!  Must have!

So I failed, and now have two slightly different sized socks: one with a gauge of  11.25 rows per inch and another with a gauge of about 11.75 rows per inch.  And it's not like I can just rip back and adjust it so they're the same length because of the pattern; it'll be very obvious if I did that.  So...it is what it is and hopefully my Mom doesn't mind.

Of course, what I should have done, had I not been blinded by nice, new needles, was go buy the same needle brand.  But what's done is done, and it's not that far off that they're unwearable (and it's better to be bigger than smaller).

Since one of the reasons for this blog is learning from my mistakes, the moral of this story is that you should never switch needles in the middle of a project if you can help it, unless you're able to adjust for it.  And if you do have to, use the same exact needle brand and type (I shouldn't have to mention they need to be the same size too, right?).  Because your gauge really does differ between each needle, no matter if they're made of the same material, no matter how slightly, and that can be the difference between a perfect fit and slightly too big or tight.

On the other hand, the Addi Sock Rockets are really nice needles, and I loved working with them.  May have been worth it.

October 27, 2013

The Tale of a Broken Needle

I finally got to the toe of the first sock I'm making for my Mom:


I was all like, whoo hoo, I only got 18 rows left. I'll finish the sock while at the laundromat.  I'm on track for getting both done by Haunukkah.  So I packed up my laundry and my knitting (standard protocol), get to the laundromat, start my laundry, and knit one row before one of the needles decided to rip away from the cable:

Sorry for the crappy pic, but you get the idea
Not pop out (I've had that problem with KnitPicks needles before).  The cable broke. Granted, magic loop is hard on the circular needles and that spot had been snagging a bit, but this is the first time I've had one break.

My first thought was: ah, man, now I got to order another one and wait a week to finish the sock.  You see, I'm not one of those knitters that has a gazillion copies of the same needle (I have a few repeats, manly within the interchangeable set, but not many).  For my long sock-sized circulars, I have one circular of KnitPicks Options solid 47" in each size from US 0 to 3, and three Knitter's Pride Dreamz wood needles in sizes US 0 to 1 1/2.  And the only reason I own the wood ones was for the last socks I made for my Mom, in which I used an alpaca/silk blend that did not tolerate my metal needles at all.

This is actually important to the story.  Because, you see, when I ordered the three wood needles from WEBS last year (which got delivered right after Hurricane Sandy.  I was impressed it got here at all), there was a mistake in the order.  They had shipped the size 0 and 1 1/2 Dreamz needles, but had sent me the size 1 in Knitter's Pride's Nova line, which is a metal needle very similar to the KnitPicks Options.  So I contacted them to inform them of the mistake and asked how I should ship the metal needle back so I could get the wood one I wanted.  They told me to keep the metal one and they'd just send me the one I ordered (which they did very quickly because WEBS is good people).

Guess what size I just broke?


Yep, the size 1s.  So someone else's mistake worked in my favor today, and I can finish the sock and start the new one without having to wait for a new needle.  

Now, a few of you may be going: But wait, didn't you say you had the wood ones as well?  Isn't that also a backup?  No, and the reason is because different needles can produce different gauges, and this effect is in full force if the needle is a different material.  Since wood is less slippery than the light metal used for the Options/Nova needles, it causes a slightly bigger gauge.  For me, it usually has an effect of making my gauge a half stitch bigger. Now, there is the slim possibility that the Nova needles will also change my gauge, but since they are the same material, it's way more likely to have a small effect if anything.  If I was doing it properly I would re-knit a swatch to make sure.  Since I'm on the toe of the first sock, I really don't care.  As long as the toe and the second sock don't come out radically different than the first one (which can happen even with the same needles for me), it'll work.

Now, I'll fully admit that there is another solution I didn't think of until now.  I do have the full Options sock DPN set as well. I could switch to those, just to finish the toe at least (I would be very wary of trying to knit the second one on DPNs after doing the first one Magic Loop.  Despite it being the same brand of needle, DPNs screw with my knitting style and therefore will most likely change the gauge even more.  And there's the fact that I don't like DPNs).

Nothing like the random coincidence that ends up working out. Anyway, at least I pack backup projects and got some of another present done:



[And yes, I know I haven't done the Rhinebeck debrief yet.  I'll be honest and say that it was great but very similar to my experience last year, so I dunno what to actually debrief, which is why it's not the post before this one.  I'll show off yarn and pictures at least.  Next post.]