Showing posts with label Nymphaeum. Show all posts
Showing posts with label Nymphaeum. Show all posts

August 29, 2014

Here We Go Again

For one of the few projects I'm currently working on, I'm making a baby sweater for one of my cousins.  Par for the course; I usually have at least one cousin who has a baby per year.  Gives me an excuse to make baby stuff again.

However, this time I decided that I should use some of the baby yarn I currently have in my stash, the majority of which is three mostly full skeins of some baby acrylic I bought for a blanket, all in different colors.  That shouldn't be a problem; if I use one of the other colors as an accent color I should have plenty of yarn for a sweater and...


Yep, I'm almost out of yarn.  And I still have another sleeve and the trim to do.  And the only reason I don't have less than that is that I realized that I was running low on yarn about four rows away from starting the striping sequence you see at the bottom of the sweater there, and therefore deciding to start it early and then make up the length using the other color.

That may not be enough, though.  I may have to rip out at least part of the other sleeve, and do some more hacking of the pattern to get them to match.  But right now I'm just carrying on as normal, hoping that the ball doesn't run out.

On the other hand, there are good endings to some things:


While I can't say she wore the shawl for that long, my sister did put it on at her wedding and show it off to some of the guests.  Good enough.

July 19, 2014

Misadventures in Shawls, Part 4: For Better or Worse, It's the End of the Road

Hey, I had a productive time void for once:


I am done.

I have to say, the last chart and half the chart before were pretty fast and simple.  Actually, they were so easy I went on autopilot and missed the fact that the second to last row had a double decrease.  On both charts.  The first I really had to hack the fix, so bad I did some weird 5 stitch increase, then had to pick up a bar from a couple rows below it on the next right side row to attempt to fill up the gap the crazy decrease had made.  I was partially successful:


Unfortunately, at that point the life line was so far down I didn't want to rip it out to do it right.

Then, I missed it again with the last chart, but at least all that took was an extra row of knitting added to decrease down to where I needed to be.  That did cause a gap in the beads in the top band:


Oh well.

Of course, blocking it wasn't very simple either.  I'm not talking about the multitude of pins; that's to be expected.  I mean that I forgot what Madelinetosh yarn loves to do:


Bleed.  Two vinegar baths later, it's still bleeding but no where near as badly:


That's when I ran out of vinegar and therefore gave up.  I gave it one more soap bath and took it out.  Good enough.

That first picture, by the way, doesn't do it justice as to how shiny those beads can be.  They gleam blue and other colors depending on the light:



That picture still doesn't do it justice, but whatever.

Part of me feels I should still do a proper debrief but...meh.  I covered most of what I would put into a debrief into this post series.  The only thing I can think of that I didn't mention was row 67.

Row 67 was the only row where I did it, checked my work, checked my work again, and still couldn't figure out why it was wonky because as far as I can tell, I followed the pattern right.  You see, row 67 did something weird.  It shifted the pattern over by a couple of stitches.  It also seemed to want 8 stitches for the end of the row section, yet there were only 6 before that and 6 after.  It made what I thought were small leaves look a bit more like spirals, or at least leafy blobs with something trailing off the left side.  It jagged the lines of yarn-overs and stockinette sections.  It looks better after blocking, but still.  I don't get what happened there or if I screwed up somewhere, or the pattern was the wonky one.  No one else on Ravelry who has done the pattern has mentioned it.

But oh well.  I guess it worked out well enough in the end.  As more than one person has said to me (and I've said to others, not that it stops me from doing the same thing), no one else notices all the mistakes you do.  So while I'm beating myself up about how it's not my best effort and it's got so many mistakes in it, and it's a wedding shawl and it should be my best effort and so forth, the two people I've sent the picture to have both complemented it.  One of these was the recipient.  So I did something right.

June 22, 2014

Misadventures in Shawls, Part 3: The Pitfalls of Combined Knitting and Stitch Markers

I have to say, despite my semi-laziness in devoting time to working on this, I've gotten pretty far.  Things are speeding up a bit, as I'm well into the part where there's a lot of decreasing going on:

On row 81 yay.

When you hit chart C and beyond, though, it may lose stitches but it gets way more fiddly for a good section of it.   Unfortunately, my tension during that part was shot to hell, and there are stitches and yarn-overs that are small, and others that are huge.

Also, I have two running problems with my stitches at the moment:

1) The markers denoting the repeats are after a purl stitch, which means my purl stitch there is waaaay to loose, as it's eating the slack going around the stitch marker (this is not the first time I've had this problem, but I haven't figured out how to correct it yet other than taking out the stitch marker, which isn't an option here):

This is the back of the work, if you're wondering.

2)   My usual knitting style is a combined style. For me and many combined knitters, this means I knit 'normally', where I twist my yarn around the needle so the right leg is facing the knitter, but I purl in a manner that results in the right leg facing away from the knitter (I've talked about this before).  There turns out there's one issue with that.  When you yarn-over counter-clockwise after or before a stitch that was knitted or purled clockwise, the yarn-over pulls the other stitch down, and makes it really hard to find the right leg of either one.

It took me more than a few rows to realize why my stitches looked screwed up, or where my 'missing' yarn-overs went.  There is several places in the shawl where I knitted the stitch wrongly by working the wrong stitch or side of the stitch.  Luckily, since this always happens near a yarn-over, it just looks a bit messy and the yarn-over is a bit smaller or bigger than normal. I might have ripped it all out when I realized I had been reading those stitches wrong, but I don't have the patience or time for that at the moment.

So, how do you read this mess to work it correctly?

If you have a stitch with the right leg out before a yarn-over, you'll usually see it as this:

Ignore my lovely pajama pants; it might have been around midnight when I took these

The first stitch you need to work is not that string that looks like a loop below the weird twist (that's the stitch below your last one), it's the outer loop tilted away from you here:

Green arrow, not the red

There's the right leg...


So just work that loop as instructed:



Once you drop the stitch, you should be able to see the yarn over much better: 


Work it as instructed, and then you're done with that.


On the other hand...

If you have a stitch with the right leg out after the yarn-over, it'll look like this:

The difference to the set above is that the first stitch you see there is longer and usually angled more to the left, and the twist where the two stitches meet is more towards the knitter (this is because the YO is pulling it down towards the knitter, vs above where it was pulling it away).  Also helps to know where you are in the pattern.

The yarn-over is actually the yarn bar slightly below the needle towards the knitter:



Use that loop to work as instructed:



Once you slip the yarn-over off, then the other stitch will look like a normal stitch (for combined knitters at least).  Work that as instructed.

And that's it.  Now, if there were some easy way to correct those darn huge purl stitches.

May 30, 2014

Misadventures in Shawls, Part 2: Well This isn't So Bad But it is a Snail

Now being a little more of a month into this shawl (I am including last week in that count, despite the fact that I made no progress on the shawl at all since I had to make garb instead), it's not as bad as I feared, though it is as slow as I've feared:


Up to row 43, woot!  Though there's a lot more beads on this shawl than it looks; flash washed them out.

This pattern has two things going for it: it's not that complicated (the pattern's written and charted well to boot) and it's pretty repetitive.  At least so far.  Beading turns out to be easy as well; you just slide the bead onto a small crochet hook and then slide it onto the desired stitch.  However, 20 repeats of lace with beads still eats time, especially at the bottom there where you had to place 2 or 3 beads a repeat for every right side row.  I guess the other good thing I got going for it is that the stitch count is decreasing (you start at the bottom of the shawl).

I decided to alternate between the blue square beads (for which I ran out of rather quickly and had to go find the store I bought them from to buy four more boxes.  They went fast) and the iridescent silvery round beads that I bought last. The result is not something I love 100%, but it doesn't look bad:

Way less yellow colored; more silvery with color accents, but you get the picture.

But this is where I have to remember that it's not for me.  I don't like that the beads that stand out so much and don't quite match, but my sister's a eclectic person who loves shiny things.  In one of my self-doubt moments I texted her a picture (better colored than this one) asking how she liked it and her answer was 'pretty!'.  So I'm on the right track.  I do have to say it's kind of grown on me at this point, though I still would have picked darker beads.

Some notes about this pattern so far:
  • The cast on for this shawl is rather interesting and I don't know if it comes from somewhere but I've never seen it before.  It involves creating a crochet chain that at certain chain counts, you YO over the knitting needle to create a stitch.  Row one is knitted using the YOs, with the chains hanging off like decorative eyelets:
After the CO is done

What it looks like on the shawl

          I'm sure it'll look better when it's blocked out.  And if I had a clearer picture.
  • As I stated, pattern makes perfect sense so far.
  • This is a simpler motif than my last lace shawl.  Maybe it's because I have more experience under my belt that it seems like that to me, but I'm thinking this is easier.  The last shawl I did I couldn't figure out the pattern for my life, but it was wall-to-wall lace with cables.  This has more stockinette dead space in it.  It's a lot easier to see where the lace will be going, and therefore I'm not glued to the chart. 
  • Which means I'm most likely faster than I was last time, but knitting 400 and something stitches of lace weight still takes 30-50 minutes for a RS and WS row.
  • However, I haven't had to rip it out to a lifeline yet (note: the green-white stripes in the shawl in all the pictures...that's a lifeline.  They get removed).  I have had to hack fixes for a couple of mistakes, but at least I can do that in this pattern.  The worst mistake so far was when I decreased one off of the center stitch of one of the repeats and didn't notice until the next RS row.  I managed to drop a stitch down one side and ladder a new one up on the other side to fix the stitch count, and keep going as is.  It's noticeable if you look hard enough, but the other beauty of lace weight is that each stitch is but a small dot in a sea of stitches; one being off isn't too obvious when looked at as a whole.
  • The crappy part about lace weight yarn is that it's soooo thin and loves to tangle in everything.  It took me a day to wind the damn thing because it didn't quite fit on my swift and managed to tangle up in itself.  It could have been worse, but I now have three separate balls from one skein because there was a couple of times I had to cut the current ball off and start another to get rid of a knot that developed.
But all in all...it's going.  Almost done with chart B; we'll see what holds up on the next chart.